The most reliable place to relax is our home, and nowadays relaxation demands internet surfing. Most of the time, we all decide to stay at home just to use the high-speed wireless network. It’s quite often when we look forward to streaming or use the internet, and suddenly, we get to know that it isn’t working. Here in this blog, we will be sharing all the necessary information about your Home Wi-Fi network and all the reasons that often interrupt it. So you can easily handle any misery regarding your Wi-Fi in the future.
Check If your Router is Outdated
The working efficiency of your Router is depended on the age of your PC, and the age of the PC is always recognized by its components. Every component of the PC must be in complete compatibility with any output source, whether it is a speaker or a Wi-Fi router and modem. In the case of the Wi-Fi issue, you must make sure that your computer components support the Router of your home and Wi-Fi network. The latest Router must be configured of IEEE 802.11ac, and the old technology must be IEEE 802.11b. Match your Router’s configuration with any of these and follow the step told above.
Try Changing the Router’s Channel
The issue that the Wi-Fi network faces often occurs due to the Router’s channel as the channel may be suffering the network issue because of the overlapping of the channels. You can try changing the channel from the settings option of your Router. Change the Router’s setting from “Auto” to others. Begin Changing the channel to Channel 6, or 7; if it didn’t fix the issue, then change it back to the “Auto” option.
Try Switching the Frequency
The Wi-Fi connections comprise two frequencies; 24 GHz and 5 GHz, and the modern routers have the option of setting the frequency to the automatic. The older version didn’t have this option, so here you need to check which model of router you are using. If you are having an older version of Router, then you need to try to change its frequency. You should try adapting to the other option meanwhile, if it is set on 24GHz, then try to switch it towards 5GHz. After implementing this, you need to check if the issue still persists or not. If it still lies, then switch the frequency back to the previous settings.
Secure your Wi-Fi with Password
The Wi-Fi service is getting cheaper day by day as the growing demand is making it more easily available. Most of the people nowadays do not believe in securing their Wi-Fi network and if you are one of them, then make sure to put a password on your home Wi-Fi network. The slow internet issue that you are facing on your home Wi-Fi network can also occur due to the multiple connections on your Wi-Fi network. So remove all the unwanted or unknown connections from the Wi-Fi settings. Now, after that, secure it with a secure and strong password.
Using the Extender
Sometimes while setting up the Wi-Fi network at our home we do not check whether the Wi-Fi is reachable to our room or to our full house. Checking its range is also a mandatory step that most of us don’t follow. If you are one of them and you are facing the same problem, then use an extender or Wi-Fi antenna. The Wi-Fi antenna will be too expensive and hard to maintain, so try to go for the option of the Wi-Fi extender. This will boost up the range of your Wi-Fi signal to another level, and you can even use your Wi-Fi in near a 50-meter range of outside your house.
Buy a Mesh Network kit
This one is the most prominent sort of them all, just because it can improve all the network issues inside your house. Though not only the Wi-Fi network will also enhance, it will fix the mobile network issue inside your house as well. It helps to eliminate the dead spot of the network inside a home, and it is available in several types to depend on the utility. Although they are costly, if you can afford it, it is the best way to tackle the Wi-Fi as well as all the network issues inside the house.
Checking the bandwidth
If you are doing some work through the internet and all of a sudden, you notice that the internet speed went slow, then the issue must be a bug or your device that is holding more bandwidth than it requires. You can fix this flaw by restarting your device, and it will reset all the settings and things back to normal.
Restarting your Router
The last and the best sort is to try restarting your Router; after doing so, you will notice that the Router’s restart clears the following things, including the Router’s memory card, and it will give the allowance to the Router to install the new updates.
Source: https://aumcafee.uk.com/how-t […]
